Track the use of vehicle mechanical equipment with Power Take-Off (PTO) sensors

Power take-off (PTO) in vehicles is a method of drawing a certain amount of power from a running engine and transmitting it to other connected devices. This PTO system is typically activated using a switch, button, or lever—for example, for dump truck beds, truck-mounted cranes, excavator buckets, and bulldozer blades. To monitor the use of mechanical equipment in heavy machinery or special-purpose vehicles in greater detail, a power take-off (PTO) sensor should be installed alongside a GPS tracker.

Benefits of Integrating PTO Sensors with GPS Tracking

GPS-based fleet management systems typically provide a range of additional features that can be integrated with GPS tracker devices, one of which is the power take-off (PTO) sensor. The information recorded by both the PTO sensor and the GPS tracker can then be accessed through automated reports available in the fleet management software based on GPS tracking. This integration allows you to determine the time, duration, location, and geofence status when the PTO is activated or deactivated. This data is useful for managing vehicle maintenance, tracking operator and vehicle productivity, and providing service evidence.

1. Manage Special Purpose Vehicle Maintenance More Effectively

Special-purpose vehicles such as dump trucks, tow trucks, excavators, bulldozers, and road sweepers may require more specialised maintenance. With a GPS tracker, you can monitor mileage, engine hours, and vehicle operating duration, all of which are important for maintenance scheduling. The addition of a PTO sensor helps you understand how the vehicle’s mechanical equipment is being used, allowing you to determine when components should be replaced or serviced. In this way, both the vehicle and its peripheral components are properly maintained to prevent downtime>.

Yellow dump truck dumping sand at construction site

2. Track Operator and Vehicle Productivity

Although a GPS tracker can provide information on vehicle activity and driving behaviour, it cannot capture the operation of mechanical equipment that uses PTO. Without a PTO sensor, it is not possible to confirm whether mechanical equipment is being operated while the vehicle is moving or stationary. The combination of PTO and GPS tracking data provides information on operating time, duration, idle time, stop duration, and the location of mechanical equipment usage over a selected period. This enables you to better understand the true productivity of your operators and special-purpose vehicles. For real-time monitoring, alerts can be set up to notify you whenever the PTO is switched on and/or off.

3. Provide Proof of Service Data

The PTO sensor can provide data on the usage of a vehicle's mechanical equipment as proof of service whenever needed—for instance, when addressing complaints. You can access accurate data regarding the time and location of the equipment's activation and deactivation, as well as the duration of continuous use over a selected period. Additionally, the PTO sensor and GPS tracker can reveal instances of misuse, such as when the vehicle's mechanical equipment is operated outside of designated times or areas.

Interested in installing PTO sensors on your heavy equipment or special-purpose vehicles? Use a reliable Cartrack fleet management system! The Cartrack fleet management system integrates GPS tracker and a wide range of selectable features into a single web-based software platform. You can add specialised features, including PTO sensors, to support your fleet management needs. Contact us now!

Customisation in Fleet Management Systems: Providing Flexibility to Optimise Your Fleet

Even within the same industry, the fleet requirements of one company may differ significantly from another. This is why vehicle telematics providers such as Cartrack offer flexible fleet management solutions. Tailored systems that can be adapted to users’ specific needs are far more effective in supporting successful fleet management outcomes.

The Importance of Customisation in Fleet Management Systems

Fleet management system is not a one-size-fits-all solution. Each fleet has different requirements in terms of performance measurement and tracking. The decision to adopt a fleet management solution must also take into account the needs of various stakeholders, such as managers, drivers, HR, General Affairs, and others. This is because a fleet management system is not only about operations, but also benefits a range of departments linked to the fleet.

As a starting point, fleet managers need to identify problems and prioritise areas that require improvement. Fleets with high accident rates and traffic violations will prioritise driving safety. For this reason, monitoring and driving behaviour alerts, as well as driver scorecards, must be included in the fleet management system being used.

Other fleets with low accident rates but high fuel expenditure will focus on tracking fuel-inefficient activity. Fuel monitoring, idle tracking, speeding alerts, and refuelling reports will be highly beneficial for these fleet managers.

Off-the-shelf solutions can address some fleet needs, but they don't provide managers with the opportunity to fully optimise their fleet. Adopting a system that can be customised to your priorities helps ensure your fleet continues to operate optimally and profitably well into the future.

The Right Solution Provider Partner is Key

Choosing the right fleet management solution provider is an important first step. The solution partner should help you identify key fleet management challenges and provide the best long-term solutions tailored to your needs. The fleet management solution offered should be able to help analyse and interpret data, identify emerging fleet trends, and provide reliable insights for follow-up action.

Cartrack offers a flexible fleet management solution, allowing you to add various features according to your needs. In addition, Cartrack’s advanced fleet management software gives you the freedom to make full use of all features to optimise your fleet operations. The following are the features provided in Cartrack’s fleet management system.

KEY FEATURES

  • Location monitoring in real-time.
  • Driving behaviour monitoring, including alerts for harsh braking, speeding, rapid acceleration, sharp cornering, and excessive idling.
  • Geofencing, monitoring vehicle activity within a defined area/perimeter that you set.
  • Points of Interest (POI) for marking important locations within your fleet operations.
  • What’s Nearby?, identifying the vehicles closest to a Point of Interest (POI) or a location you select.
  • Route planner, allows you to plan, schedule and monitor the progress of assigned routes for selected vehicles.
  • Route replay to track how your vehicle was driven (route traveled, distance traveled, speed, driving behaviour alerts, etc.) at a time of your choosing
  • Starter monitoring, which provides real-time notifications whenever the ignition is turned on and/or off, including the time and location information.
  • Grouping of drivers and vehicles to focus monitoring and reporting
  • Logbook to separate business and personal trip records, and add details of each trip.
  • Schedule reminders to assist in scheduling service based on the date, kilometer, and duration of operation of each vehicle, STNK and SIM renewals, as well as other schedules related to fleet administration.
  • Dashboard, displaying fleet statistics related to the priorities of your business, for the selected time period and vehicle group.
  • Automated reports to help you understand your fleet and take action based on credible data—simply choose from dozens of available report types or customise reports according to your needs, with options in Excel or PDF format, which can be downloaded directly or sent via e-mail.

Officers wearing safety vests use tablets to customize the fleet management system to monitor truck operations in the parking area.

ADDITIONAL FEATURES

  • Fuel sensor to track fuel consumption, refuelling, loss, and fuel efficiency.
  • Temperature sensors, with each vehicle able to be fitted with up to 4 temperature sensors.
  • Cargo door sensors to monitor cargo door opening and closing activity.
  • Cement mixer sensor to monitor the loading and unloading activity of cement mixture from the cement mixer truck
  • Power Take-Off (PTO) sensors to monitor the operation of vehicle peripheral mechanical equipment, such as cranes and tow hooks.
  • CAN Bus sensors to integrate CAN Bus data from vehicles into the Cartrack fleet management system.
  • Remote immobiliser to remotely shut down the engine, effectively activated once the vehicle has stopped so that the ignition cannot be started again.
  • Driver ID tag (DID) for identifying drivers, controlling vehicle access, and recording working hours.
  • A combination of DID and an immobiliser to prevent unauthorised vehicle ignition, where the driver must verify themselves using a driver ID tag in order to start the vehicle.
  • Panic button, enabling drivers to send an emergency alert signal to fleet operators.
  • Communicator for driver task assignments, progress monitoring, and more efficient task management.
  • Mi-Fleet, helping to manage fleet costs more efficiently.
  • Live Vision or monitoring cameras, with each vehicle able to be fitted with up to 4 cameras.

The flexibility of the Cartrack fleet management system can be seen not only in the wide range of additional features provided, but also in the customisation of its core functions. All features, including standard ones, can be configured according to your needs—making the Cartrack fleet management system truly your own. Consult your fleet management requirements so we can help provide the best solution. For new customers, we also offer free training on how to use the Cartrack fleet management software. Contact us now!

GPS Tracker Solution with Immobiliser, Capable of Switching Off Vehicles Remotely!

Have you ever heard of an immobiliser in motor vehicles? This device, also known as a Start Prevent, functions to prevent a vehicle’s engine from being started (starter system). The latest vehicles, particularly European brands, and some types of motorcycles already have it, namely with an immobiliser key system.

In addition, there is another type of immobilizer: the wireless system. Unlike an immobilizer key, which needs direct signal contact or close range, a wireless immobilizer can work from a distance (remotely). GPS tracker companies usually provide this type of immobilizer, which lets users shut down the engine remotely through an app, website, or SMS.

The machine can be turned off either directly or not

There are two types of remote immobiliser commonly offered by GPS tracker companies, namely those that switch off the vehicle engine directly and those that do so indirectly from a distance. “Direct” means that when you send an immobilise command, the vehicle engine is switched off gradually or immediately (depending on the GPS tracker company providing it), regardless of whether the vehicle is moving or stationary. “Indirect” means that the engine shut-off command only takes effect after the vehicle has been switched off, so that the vehicle cannot be started again.

Each has its own advantages. A remote immobilizer that cuts the engine immediately lets you act quickly when your vehicle is stolen. You can stop the theft before your vehicle is taken too far. On the other hand, a remote immobilizer that doesn't cut the engine immediately takes road safety into account. The vehicle stays secure and road accidents can be prevented, because engine ignition is disabled only once the vehicle has stopped or is parked.

Pemandangan udara jalan berliku di hutan hijau dengan ilustrasi sistem GPS tracker immobilizer untuk matikan kendaraan jarak jauh.

Cartrack Immobiliser and Its Modifications

With various considerations, Cartrack only recommends a remote immobiliser that becomes effective after the vehicle has been switched off by the driver. Users send an engine shut-off command for the selected vehicle via the “Immobilise” feature on the mobile application or Fleet Web Cartrack. Cartrack will send an OTP code via SMS to the registered mobile number. You simply enter this OTP code into the mobile application or Fleet Web Cartrack. Whenever you want to start the vehicle again, you can disable the immobiliser using the same process, namely OTP verification via SMS.

Besides the standard remote immobilizer, Cartrack also offers an installation that combines the immobilizer with a driver identification (DID) tag. A DID tag is an iButton device that verifies authorised drivers. The driver must tap the DID tag before starting the vehicle, or a long alarm will sound. When combined with the immobilizer, the driver cannot start the vehicle without first tapping the DID tag. In other words, the DID tag acts as the driver's authorisation to start the vehicle.

Protect your business assets from theft and misuse, and prevent major losses. Use a Cartrack GPS tracker with the additional remote immobilizer feature, or the combined immobilizer and DID tag. You can apply it to a wide range of vehicles, including motorcycles. Contact us by filling in the form here, and our consultants will get in touch to help you.

With a GPS Tracker, Your Logistics Service Customers Can Also Track Their Deliveries

Having vehicles equipped with a GPS tracker will increase the value of your logistics business. Not only does it benefit your expedition company, but it also benefits your customers. A GPS tracker allows your customers to be informed about the real-time location of the delivery vehicle carrying their goods. At least two features of GPS tracking software can provide real-time vehicle location updates to customers, namely share location and geofence.

Share Location

The share location feature in GPS tracking software allows fleet managers to share the current location of a vehicle in the form of a link. You can copy and share the link through any platform you use to communicate with customers, such as WhatsApp, SMS, or email. The link’s validity is based on calendar dates and has no restrictions. Customers simply click the shared link to access the real-time location of the vehicle carrying their goods.

In addition to improving visibility, the share location feature provides certainty for recipients. They can monitor deliveries at any time, estimate more accurate arrival times, and ensure smooth business operations. This is also important for your customers’ businesses, as delivery delays can impact subsequent supply chain activities.

The expedition officer puts the package into a delivery car equipped with a GPS tracker to make it easier for customers to track the delivery.

Geofence

With the geofence feature, you can virtually mark customer areas on a map and monitor your vehicles’ activity within those zones. From there, you can configure alerts to be triggered whenever a vehicle enters and/or exits the designated area. Alerts can be sent via email and SMS or displayed on an RSS page—not only for internal use within your logistics company, but also for your customers. Customers are immediately informed when a delivery vehicle enters their area, allowing them to prepare for unloading.

Increase trust and customer satisfaction for your logistics services by enabling customers to track their deliveries. Use Cartrack’s GPS tracking-based fleet management system and leverage the share location and geofence features to optimise your logistics services. Contact us now and get a FREE LIVE DEMO!